Regent Turned Timber Balusters 1000x42sq (Pine)

Description

A 42x42mm Radiata Pine turned and tapered baluster, pre-sanded and ready for painting/staining. This particular baluster was specially designed to suit hamptons interiors. The exact dimensions of the baluster and turnings can be found in the CAD drawings above.

These 42mm balusters will sit perfectly in a rebated handrail or base rail, and are most commonly used in hamptons and heritage style staircase designs.

*** IMPORTANT - PLEASE READ ***

This product is suitable for internal use only, you can find our range of external grade balusters here.

Important Dimensions

	Overall
Height	1,000mm
Width	42mm
Depth	42mm
Diameter of top pin	25mm
Length of turning	800mm
Length of bottom square	200mm

FAQ

Where would you normally use timber balusters ?
As part of a balustrade on a staircase. (The baluster is the part between the top handrail and bottom rail).

What is it made out of ?
Plantation grown Radiata Pine.

How should you finish it ?
If looking for a natural finish, then a clear lacquer will be fine; or you can use a stain to achieve your desired colour then use a clear lacquer to finish it off.
If wanting to paint, a water based primer/undercoat is not a necessity (although it wouldn’t hurt), but at least 2 coats of the final colour is a must.
Speak to your local paint retailer for more info.

Video

Please Read Before Ordering : This baluster is NOT suitable for outside use. Click here to view our range of exterior use balusters.