53 deg Ease Up in Vic Ash for EZIRAIL 50mm with Flat Base Victorian Ash

Where would you normally use this timber handrail fitting ?
As part of a handrail on a staircase when coming up to a quarter landing or a winder. This 53 degree fitting is used in conjunction with the 90 degree Ease Over fitting (JH138T) and allows for a stair handrail on a 37 degree incline (most stairs are pitched at 37 degrees) to to rise an extra step before flattening out.

What is it made out of ?
Plantation grown Australian Oak (depending on availability it is either Victorian Ash or Tasmanian Oak).

What are the important dimensions ?
Overall : 50mm Diameter turning through 53 degrees.
Both ends have a 16mm Diameter x 35mm Deep hole

How do you fix it to the handrail ?
Drill the end of the handrail (with a 16mm drill bit), then using a 16mm multi groove dowel, glue the rail to the pre-drilled bend. A small amount of sanding will be required to blend where they join.

How should you finish it ?
If looking for a natural finish, then a clear lacquer will be fine; or you can use a stain to achieve your desired colour then use a clear lacquer to finish it off.
Speak to your local paint retailer for more info.