Where would you normally use timber handrails ?
As a handrail, either attached to the wall or as part of the balustrade on a staircase.
What is it made out of ?
Plantation grown American White Oak.
The rail is actually made up of 2 pieces of timber that have been laminated together.
The reason why this is done is because American White Oak is not available in sizes greater than 50mm.
For us to finish 50mm in diameter we need to start with material that is 4 to 5mm thicker, which means that the only way we can achieve that is to glue 2 pieces together.
The glues we use are suitable for interior application only. If you wish to use a round handrail for exterior application, then we suggest you go with our 43mm Designer Rail
The grade of timber that we use is referred to as SELECT, and is the highest quality available.
It is relatively clear and free of defects, but a small amounts of gum vein, surface checking (splits), tight knots and black specks are acceptable within the SELECT grading rules.
These defects give the timber its character, and will not be considered in the case of a refund being requested.
What are the important dimensions ?
Overall : 50mm Diameter x Various Lengths
Maximum length available is approximately 4.0 metres (subject to availability).
How should you finish it ?
If looking for a natural finish, then a clear lacquer will be fine; or you can use a stain to achieve your desired colour then use a clear lacquer to finish it off.
Speak to your local paint retailer for more info.
*** IMPORTANT - PLEASE READ ***
Due to the overall size of this product, even if the order value is over $500, FREE SHIPPING will NOT be included.
Please Read Before Ordering : When ordering handrail, add up the total number of metres you require then round it up to the nearest metre. This number is what you add to your cart. When you get to the payment page there is a SPECIAL DELIVERY INSTRUCTION box that you can use to record the specific lengths that you need.