10% Discount Offer

Up until the 19th December 2018, get 10% off the price of all products. To claim, please enter the code XMAS18 on your shopping cart

  • Round Corner Post (3mm) - Flat Balustrade - Mirror [Mirror 316 Stainless]

    Round Corner Post (3mm) - Flat Balustrade - Mirror
    Round Corner Post (3mm) - Flat Balustrade - MirrorRound Corner Post (3mm) - Flat Balustrade - MirrorRound Corner Post (3mm) - Flat Balustrade - Mirror
    SSP015-M6 Material:  Mirror 316 Stainless
    Shipping Costs To find out what the cost of shipping will be, add the items to the shopping cart, then go to the checkout and select your state.
    We deliver all over Australia. We are located in Adelaide. Our only retail outlet is in Adelaide.

    In Stock

    $220.23per Piece
    Inc GST
     
    Discount Options
    1-4 $220.23
    5+ $209.22
    Due to the overall size of the product free
    shipping will NOT be included.
    100% secured payment.
    Where would you normally use a stainless steel post that has 11 M6 rivet nuts inserted on 2 adjacent sides ?
    As a corner post to structurally support a horizontal cable balustrade on a deck or balcony.

    Which saddles go with this post ?
    Any of the saddles that in the description say they are used for Flat Balustrade Posts. A screw is supplied to fix the saddle onto the top of the post.

    Why are some posts 1.6mm and others are 3.0mm ?
    This refers to the wall thickness of the post.
    In most cases the 1.6mm wall thickness will be enough for use on corner, end and intermediate posts with glass balustrade.
    For wire balsutrade, you may want to consider going with the heavier 3.0mm wall thickness; particularly in the case of a free standing end post where the correct legal tension required for the wire cable could cause the post to distort. For intermediate; the 1.6mm wall thichness is usually enough.

    What is it made out of ?
    316 Stainless Steel in a Mirror Polish Finish.

    What are the important dimensions ?
    Overall Height : 960mm, once one of the saddles has been added.
    Wall Thickness : 3.0mm.
    Diameter of post : 50.8mm
    Diameter of base : 114mm (supplied with cover plate)
    There is 2 rows of 11 M6 rivet nuts (right hand thread) inserted on 2 adjacent sides of the post. They are spaced 80mm apart so as to conform to regulations for wire cable balustrade.
    If required, the right hand thread rivet nuts can be swapped for left hand thread rivet nuts on 1 or both sides of the post (for no extra charge). Either make note of it during the checkout process in the online shop, or send us a separate email after your online order has been placed.

    How should you fasten it to the ground/deck ?
    Due to the large number of surfaces that the post could be fixed to, we do not supply any fasteners.
    We suggest that you speak to a local hardware store for more info.
    The heavy duty base plate is supplied with 3 grub screws that can be adjusted to aid in the levelling of the post.

    *** IMPORTANT - PLEASE READ ***
    Due to the overall size of this product, even if the order value is over $500, FREE SHIPPING will NOT be included.
    These posts are specially made when an order is placed. Unless the post is defective in some way, NO REFUNDS will be given if you have ordered the wrong post or you decide to change your mind and want to return it.