Cart (0)
Round Corner Post (3mm) - Flat Balustrade - Satin
Round Corner Post (3mm) - Flat Balustrade - Satin_1Round Corner Post (3mm) - Flat Balustrade - Satin_2Round Corner Post (3mm) - Flat Balustrade - Satin_3Round Corner Post (3mm) - Flat Balustrade - Satin_4
SKU: SSP015-S6

Round Corner Post (3mm) - Flat Balustrade - Satin

Used for flat balustrade, this 50mm diameter round corner post in a satin finish with a 3.0mm wall thickness; comes with a heavy duty welded on base plate with cover. Perfect for wire cable balustrade.
$261.56 per Piece Inc GST
Discount Buy Options
Units Price
  In Stock
This product does NOT qualify for free shipping. An oversized surcharge may apply
Australia Wide Delivery
Shipping Costs  
SKU: SSP015-S6 Material:  Satin 316 Stainless
We are located in Adelaide. Our only retail outlet is in Adelaide.


Where would you normally use a stainless steel post that has 11 M6 rivet nuts inserted on 2 adjacent sides ?
As a corner post to structurally support a horizontal cable balustrade on a deck or balcony.

Which saddles go with this post ?
Any of the saddles that in the description say they are used for Flat Balustrade Posts. A screw is supplied to fix the saddle onto the top of the post.

Why are some posts 1.6mm and others are 3.0mm ?
This refers to the wall thickness of the post.
In most cases the 1.6mm wall thickness will be enough for use on corner, end and intermediate posts with glass balustrade.
For wire balustrade, you may want to consider going with the heavier 3.0mm wall thickness; particularly in the case of a free standing end post where the correct legal tension required for the wire cable could cause the post to distort. For intermediate; the 1.6mm wall thickness is usually enough.

What is it made out of ?
316 Stainless Steel in a Brushed Satin Finish.

What are the important dimensions ?
Overall Height : 960mm, once one of the saddles has been added.
Wall Thickness : 3.0mm.
Diameter of post : 50.8mm
Diameter of base : 114mm (supplied with cover plate)
There is 2 rows of 11 M6 rivet nuts (right hand thread) inserted on 2 adjacent sides of the post. They are spaced 80mm apart so as to conform to regulations for wire cable balustrade.
If required, the right hand thread rivet nuts can be swapped for left hand thread rivet nuts on 1 or both sides of the post (for no extra charge). Either make note of it during the checkout process in the online shop, or send us a separate email after your online order has been placed.

How should you fasten it to the ground/deck ?
Due to the large number of surfaces that the post could be fixed to, we do not supply any fasteners.
We suggest that you speak to a local hardware store for more info.
The heavy duty base plate is supplied with 3 grub screws that can be adjusted to aid in the levelling of the post.

Due to the overall size of this product, even if the order value is over $500, FREE SHIPPING will NOT be included.
These posts are specially made when an order is placed. Unless the post is defective in some way, NO REFUNDS will be given if you have ordered the wrong post or you decide to change your mind and want to return it.