Where would you use a hex hand swager ?
When doing wire cable balustrade for System 11
and System 12
you need to be able to crimp the ends of the hex hand swaged terminal (SSW065-S) that the wire (3.2mm in the 1x19 configuration) goes into so that the wire is securely held in place.
The hex hand swager is the quickest and easiest method of doing this process.
Please be warned that attempting to use a pair a plyers or something similar is NOT recommended, as the pressure required to flatten the fixings is far greater than can be applied by hand.
If you have any questions, please contact us prior to ordering.