Cart (0)
Skirt for 115sq Stair Posts (Pine)
Skirt for 115sq Stair Posts (Pine)_1Skirt for 115sq Stair Posts (Pine)_2Skirt for 115sq Stair Posts (Pine)_3

Skirt for 115sq Stair Posts (Pine)

Increase the size of the base of your 115sq stair post to 147sq by using these four 16mm thick panels of pine. They come pre-mitred so that they can be quickly fixed in place.
$75.71 per Piece Inc GST
Discount Buy Options
Units Price
  In Stock
Delivery available anywhere within Australia.
Australia Wide Delivery
Shipping Costs  
SKU: JN148R Material:  Pine
We are located in Adelaide. Our only retail outlet is in Adelaide.


Where would you normally use timber post skirt ?
Around the bottom a 115 x 115mm stair post.

What is it made out of ?
Plantation grown Radiata Pine.

What are the important dimensions ? 
Each skirt is made up of four 16mm thick panels of height 570mm. The width of each panel is 148mm. 
The outside edges of each panel has a unique mitre-lock joint that allows for easy assembly.
A small moulding is supplied that can be mitre cut and wrapped around the post to finish the top of the skirt off.

How should you finish it ?
If looking for a natural finish, then a clear lacquer will be fine; or you can use a stain to achieve your desired colour then use a clear lacquer to finish it off.
If wanting to paint, a water based primer/undercoat is not a necessity (although it wouldn’t hurt), but at least 2 coats of the final colour is a must.
Speak to your local paint retailer for more info.